Equipment Guidelines
1. Temperature Controller
2. Toaster
3. Nespresso
4. Beam Projector
5. Bluetooth Speaker
-
Slide sideways to view Equipments >
1. Temperature Controller
-
1. Change the temperature by turning the dial on the thermostat.
2. It is set to the optimal tenperature.
When setting the temperature, please chang it within 1 to 2 degrees.
(It works only when the set temperature is higher than the current temperature.)
3. The hot water temperature cannot be changed,
and the air conditioner remote control is not provided during winter.
2. Toaster
-
1. Open the door and place the bread in the middle of the grill.
2. When using the steam funtion, fill the stainless steel cup inside the toast with water and place it in the cup holder.
3. Turn on the power and turn the dial to set the temperature.
4. Cooking will start when turning the timer dial to set the cooking time.
5. When cooking is complete, take out the bread.
3. Nespresso
-
1. Insert the capsule in the direction shown in the photo.
2. Place the cup and press the extraction button according to the desired coffee strength.
3. When coffee extraction is complete , it automatically stops.
4. Beam projector & OTT use
-
1. Press external input on the projector remote control and select ‘hdmi2’
2. You can use the OTT service by pressing the power button on the settop remote control.
3. Please use a personal account for Netfix and log out after use.
5. Bluetooth Speaker
-
1. Power button : Please press the button briefly to turn on, press and hold to turn it off.
2. Bluetooth pairing : Long press to start pairing mode.
3. Volume and LED : Blinking white indicates pairing, solid white indicates pairing complete, and blinking red indicates low battery.
4. Lamp Brightness: Press the lamp switch once to make 100% brightness, press it twice to make 50% brightness, and press it three times to turn it off.
